DOSIMETERS


Show:
Sort By:

Atom Fast Scintillation Crystal Radiation Detector

Atom Fast Scintillation 8 x 8 x 50 Crystal Radiation Detector Dosimeter / BluetoothLANGUAGES AVAILABLE IN THE APP:  English, Russian.Atom Fast is one of fastest dosimeters in the world!DOSIMETER / RADIATION DETECTOR  ATOM FAST 8*8*50 radiation onthe Scintillator for smartphones and tablets, Bluetooth-dosimeter.The best performance:Radiation sensor comprises a crystal of Caesium iodide activated by thallium, and solid-state photo-electron multiplier.Atom Fast with the Scintillator CsI 8*8*50 Crystal Radiation Detector Dosimeter with bluetooth for smartphones and tablets.The dosimeter contains NO hazardous and NO radioactive materials. Dosimeter dispose is completely safe for humans, animals and the environment!Weight of the device is not more than 50 g.Radiation sensor comprises a crystal of Caesium iodide activated by thallium, and solid-state photo-electron multiplier.Atom Fast is one of fastest dosimeters in the world! There are no competitors for this device. It provides speedy measurements in approx 25 times quicker then the top-dosimeters based on Geiger Muller SBM20 or others.Batteries have 150 cycles of charge until the battery is not degraded more than 15%.Atom Fast dosimeter can work on a single battery charge for 2 months with smartphone or 4 months autonomously with sound and vibration signals. This means that the dosimeter can operate continuously 25 or 50 years respectively.Atom Fast has no equal competitors in scope to refine the measurement result at any point in the range of dose rates available to a reasonable accuracy as long as the required experimental conditions.Atom Fast device have no equal in speed of reaction to changes in dose rate.Atom Fast has no equal competitors in terms of user-friendly interface. Atom dosimeter works in conjunction with smartphones and tablets through a special application.On the Apps screen in excess of digital and visual information to make a rapid assessment of the situation without any special knowledge.Atom Fast leadership in this area is easy to check in GooglePlay & AppStore among similar applications.You can download the App without purchasing the device & test it in Demo-mode. Download Android Atom Swift app or Atom Tag app.In iOS Atom Radiometer app.Specification:Work size scintillation detector 8 * 8 * 50 * mm. for iOs here dosimeter Atom . for Android - here Atom Tag app here Atom Swift app Atom is an application Next.Energy range of detected photon radiation, at least 50 - 3000 keV.The maximum counting speed of at least 10,000 pulses / sec.Anisotropy of the sensitivity of Cs137 - no more than 30%.Built-in battery capacity of 280 mAh.Time from a fully charged battery built on the natural background radiation without using a sound / vibration signal for at least 2 monthsThe fully charged battery built on the natural background radiation without using wireless communication and sound / vibration alarm for at least 4 months.complete internal battery charge time from USB-port is not more than 3 hours.The service life of the internal battery is not less than 150 cycles within the warranty period of the device.Operating temperature range from -40 to +40 degrees C. When the temperature rises above 40 degrees C the device will alert the user about this dual tone siren sound repeating every ten minutes.With further increase in temperature the correct operation of the device is not guaranteed.Overall dimensions 113 * 25 * 14 mm.Weight of the device is not more than 50 g. Box contents:Dosimeter Atom Fast 8x8x50mmThe USB-cable for charging the built-in lithium-ion batteryCarrying caseDosimeter Atom is designed for the rapid assessment of the radiation situation on the ground, radiation safety control of buildings, premises, vehicles, various objects and materials, detection and localization of sources of ionizing radiation in the home and at work, use in a physical experiment and physical demonstrations, the X-ray radiation, environmental studies.The dosimeter is a miniature device comprising a detector of ionizing radiation (scintillation detector: cesium iodide crystal size of 4 * 7 * 35 mm, or 8 * 8 * 50 mm with a solid state photomultiplier), email necessary circuitry for its operation, accelerometer radio Bluetooth standard 4.0 and lithium-ion battery. For processing, storage and display of incoming sensor data is used built-in microcomputer, and after data transfer over the radio interface for processing, storage and display information using smart phone or tablet computer running iOS or Android operating system running special applications available for free download in AppStore or Google Play. There are several applications for Atom Fast differ functionally. For Android is Atom Tag applications, Atom Swift, Atom Next. "Dosimeter Atom" for iOS is an application.Capability of the dosimeter with a lot of different applications. For information about applications, refer to corresponding descriptions on additional kbradar.org site.The dosimeter contains no  hazardous and radioactive materials, and dispose of the dosimeter are safe for humans, animals and the environment.Communication between the dosimeter and the smart phone or tablet PC is supported via radio Bluetooth 4.0 standard, with the loss of communication device operates autonomously in a customizable thresholds with alarm warning sound and vibration alarm. The data on accumulated over time due to lack of dose stored in the dosimeter and sent to the smartphone or tablet computer at the resumption of communication. In communication with one smartphone or tablet computer can hold a lot of dosimeters Atom.To recharge the built-in battery monitor using the USB port of any computer or any device with a USB charger connector and the supplied cable. The instrument used modern energy saving technology, but it should be noted that the frequent use of sound, especially a vibration alarm, and low ambient temperatures significantly reduce the duration of continuous operation of the built-in lithium-ion battery. By reducing the built lithium ion battery is below 10% dosimeter will signal this one long and three short beeps, repeated once per minute. In this case, it is recommended built-in lithium-ion battery is fully charged the unit for 3 hours using the USB-cable supplied.Before working with a dosimeter, make sure there is no damage of the dosimeter housing. The dosimeter is not sealed device does not use the appliance under rain or sleet, if necessary measurements protect the device from ingress of water. If water is spilled on or inside the dosimeter switch off the appliance, allow to dry thoroughly and fully recharge before next use. If necessary, keep liquids radiation inspection device at a distance of 1-2 cm from the liquid surface, if necessary, use a plastic bag to avoid contamination of the surface of the dosimeter.Do not subject the monitor to strong shocks and squeezing. When moving from cold to warm room to measurements do not proceed until the surface of the device is present condensed moisture. When contamination of the dosimeter wipe the unit with a soft dry cloth. Do not use organic solvents to clean the dosimeter: they may damage the housing. Do not try to disassemble and repair the unit, when a fault is detected, contact our service center. Remember that any attempt at repair could void your warranty for the dosimeter.Operation. Enabling deviceTo turn on the dosimeter briefly connect it to the charger or USB-port of a PC using the supplied charging cable. A short beep and turn on the dosimeter. Turn on bluetooth settings used for your smartphone or tablet.Install the application using the links:or by entering in a string search for "dosimeter atom" in the AppStore and «AtomNext» on Google Play, respectively. Run the application. After a few seconds, the application will detect all are confident in the communication area included dosimeters and give the user the ability to choose which device to operate at the moment. During the linking process dosimeter will emit a double beep, when the loss of connection - single long beep.Modes of the dosimeterYour dosimeter with an application on a smartphone / tablet may operate in two basic modes - search and measurement. Operating mode selection is performed from within the application.Consider the operation of the device in each of them.Search modeSearch mode of the dosimeter is characterized by fast response to changes in the radiation situation, the measurement accuracy is reduced. In the natural background radiation 0.1 mSv / h (10 mR / hr) during a complete changing information does not exceed a few seconds. Work in the search mode is recommended when rapid survey areas, buildings, building materials, vehicles for radioactive contamination. Display search mode is implemented in the form of a graph, histogram, or simulate pointer instrument. Data from the search mode can be used by some applications for replenishment bind files to maps of the area.Measuring modeIn the measuring mode the dosimeter continuously refines the dose rate by displaying information on the statistical error in the measurement of the current session. A new session can be started at any time by pressing the reset button on the screen, all the information about the previous session will be deleted. The measurement mode suited to the detection of inactive objects by comparing the dose rate in the vicinity of the inspected object with the natural background radiation away from it, as well as the need to obtain high accuracy result..

£369.00 Ex Tax: £307.50

Atom Simple Dosimeter for Smartphone/ Tablet

Atom Simple radiation dosimeter for the smartphone and the tablet is a complex interaction between radiation detector (dosimeter directly Atom Simple radiation) and an application to be installed on the smartphone / tablet.Radiation sensor comprises a Geiger counter GMS-20 (Geiger-Muller tube). The dosimeter is used to measure radiation and graphical visualisation of background radiation. Important note! On March 26, 2019 Google Play under the pretext of which are not clear to us, rejects Atom Simple application publication. Download the APK file is available without registration here:  https://drive.google.com/file/d/1jA5pHC_BSWj-efNgrx0o57NHjCo0Ktjg/viewor e-mail radarspecb@gmail.com, send the file. The main advantage of this dosimetric complex - it is a dynamic infographics on the smartphone / tablet, which is updated every second screen, and several parameters to control the accuracy of the measurement: 1. In the "locator" (search mode), this allows time for about two seconds to see the dangerous rise in radiation background of a tenfold excess of natural background level or higher. Or in a time of about five seconds to evaluate the degree of danger of the environment or object within a ten-fold excess of the level of natural background. 2. In the measuring monitor mode allows to independently assess the accuracy of the measurement accuracy by several additional parameters. An additional advantage - the information from the sensor is processed in parallel in two modes: fast and rough mode "locator" (search mode) and relatively accurately in the measuring mode.Smartphone / tablet act as monitor radiation sensor readings. Without a smartphone / tablet (autonomously) Atom Simple sensor does not work. To see how the sensor values are transmitted to a smartphone or tablet in the demo mode, the happy owners of androids can download the free application is the same name of the Google the Play :   https://play.google.com/store/apps/details?id=com.troitsk. dosimeterfor owners of iPhones have an app in the iTunes:  https://itunes.apple.com/ru/app/dozimetr-atom/id923687267?mt=8 , but it is not a demo version. Logo application - multibeam star with balls on the ends of the beams.In the search field applications "radiation dosimeter" dial enough phrase. Launch the app, downloaded from google play. This opens a window at the bottom of which is a yellow "demonstration" button. Click on this button. You will find yourself in a demo mode demonstration interface capabilities and to see a simulation of the reflection radiation sensor reading on your smartphone / tablet. In the first window that opens, you will see a display mode "Measurement". This precise measurements of background radiation. How to control the mode "Measurement" and to control the accuracy of:- "Reset" button allows you to start a new set and analysis of detected particles / radiation (click on it) - the counter "Registered particles" allows you to control the number of registrations for the reliability evaluation - the indicator "threshold exceeded dose rate" is installed by default on our 60 my / h level (you can change this threshold by simply clicking on this indicator as the / button in the window that opens, change the 60 24 / You will see a visual alarm activation / if you go to Settings and turn on vibrate, vibration will start to operate when the threshold is exceeded)- indicator percent helps assess the accuracy of the display readings, it shows measurement / error the higher the percentage, the less reliable the display (below 15% of the readings are considered to be valid, to be more confident in the display, it is possible to wait until the indicator "particles Registered" will exceed 200. "Search" mode: in this mode, the display is not very accurate, but differ in speed and Maximal noy sensitivity to an increase in background radiation. How to control the reading mode "Search":- if the graph and digital display begin to rise, then your sensor closer to the place, or the subject, the background radiation which is possibly higher natural background (in practice the natural background is from 9 to 17 mR / h, something that deserves your attention, should show on the graph exceeding these values for at least 7-10 units) - if the graph and digital display begin to decline after the rise of 7-10 units, then studied the subject or place are not of interest while you explore the objects and terrain in the "Search" steam continuing process of refining the level of background radiation in the "Measuring" mode.The dimension indicator "dose intensity" can be set in mR / h or mSv / h to the "Settings" page.If you have a budget smartphone or tablet, or brand Lenovo, then the dosimeter may lack power. To make your smartphone or tablet to work, you need to go to the application in the oscilloscope mode and adjust the frequency. a graphical interface that allows you without any special knowledge and skills to choose the right frequency.You can put labels radiation activity and save the map to a file on the "Maps" page. Sensor properties of the radiation dosimeter Atom Simple:- works with devices running iOs and Android- measuring and provides the search mode- adjustable threshold level exceeding the background radiation- dosimeter connects to the smartphone / tablet via the audio jack Before turning the dosimeter Atom Simple eponymous need to download the free app from Google Play and the App Store.Dosimeter Atom Simple radiation works with devices running Android 4.0 and above.Atom Simple radiation dosimeter operates with any product from iPhone4 and above.Note to the compatibility with iPhones:In the iPhone should be a standard audio jack connector. Via an adapter to connect fail. We do not have yet the solution for the adapter. When connected to an iPhone application requests access to the microphone. This is normal. The application has a section with a list of connected to the dosimeter application. In this list, you need to click Atom Simple.Note to the compatibility with android:Atom dosimeter can be called the Simple tester normal androids. This means that if your android earned with Atom Simple dosimeter without additional tweaks smartphone, then you have a great smartphone. If your smartphone is not immediately earned a dosimeter Atom Simple, then at least in the audio channel of the smartphone have shoals of iron, which the manufacturer of the smartphone adjust programmatically. Main specifications:Manufacturer  NPP KB RadarProducing countryRussiaAdditional characteristicsContinuous operation timeNot limitedEnergy range of detected gamma and X-rays30 keV - 3 MeVDimensions of the device110 * 20 * 12 mmAmbient Operating TemperatureFrom minus 40 to plus 60 degrees Cpower consumptionNo more than 10 mWType of detected radiationBeta, gamma, X-rayweight unitNot more than 25 gEnergy range of detected beta radiation300 keVpower measurement range dose of gamma radiation0.05 mSv / h - 1 mSv / h (5 mR / h - 100 mR / hr)Measurement range of a cumulative dose of gamma and X-raysNSv 1 - 1 Sv (0.1 mR - 100 F)Power Deviation dose 137Cs gamma-ray source at a dose rate of 10 mSv / hNot more than 15%Box contents:Dosimeter Atom SimpleThe cable for smartphone or tablet 3.5mm jackCarry case..

£109.00 Ex Tax: £90.83

Atom Swift Scintillation Crystal Radiation Detector Dosimeter

Atom Swift Scintillation Crystal Radiation Detector DosimeterWE ALWAYS HAVE LATEST VERSION OF SOFTWARELANGUAGES AVAILABLE IN THE APP:  English, Russian APP.OFFICIAL UK DISTRIBUTOR, VAT, UK STOCK, UK COMPANY.Atom SWIFT is one of fastest dosimeters in the world!DOSIMETER / RADIATION DETECTOR  ATOM SWIFT 5*5*30 radiation on the Scintillator for smartphones and tablets, Bluetooth-dosimeter.The best performance:Radiation sensor comprises a crystal of Caesium iodide activated by thallium, and solid-state photo-electron multiplier.Atom Fast with the Scintillator CsI 5*5*30 Crystal Radiation Detector Dosimeter with bluetooth for smartphones and tablets.The dosimeter contains NO hazardous and NO radioactive materials. Dosimeter dispose is completely safe for humans, animals and the environment!Weight of the device is not more than 20 g!Radiation sensor comprises a crystal of Caesium iodide activated by thallium, and solid-state photo-electron multiplier.Atom Swift  one of fastest dosimeter in the world! There are no competitors for this device. It provides speedy measurements in approx 25 times quicker then the top-dosimeters based on Geiger Muller SBM20 or other.Atom Swiftt dosimeter can work on a single battery  not less than 100 days on the battery CR2032 Atom Swift dosimetry atom has no equal competitors in scope to refine the measurement result at any point in the range of dose rates available to a reasonable accuracy as long as the required experimental conditions.Atom Swift device have no equal in speed of reaction to changes in dose rate.Atom Swift has no equal competitors in terms of user-friendly interface. Atom dosimeter works in conjunction with smartphones and tablets through a special application.Applications to our dosimeters can be used by people poorly versed in the subject. On the Apps screen in excess of digital and visual information to make a rapid assessment of the situation without any special knowledge.Atom Fast leadership in this area is easy to check in GooglePlay & AppStore among similar applications.You can download the App without purchasing the device & test it in Demo-mode. Download Android Atom Swift app or Atomnext app.In iOS Atom Radiometer app (Apple app is limited in functions due to Apple politics)Sorry, eBay don't allow direct links in lot descriptions.Dosimeter Atom Swift (hereinafter - the dosimeter) is designed for the rapid assessment of the radiation situation on the ground, radiation safety control of buildings, premises, vehicles, various objects and materials, detection and localization of sources of ionizing radiation in the home and at work, use in a physical experiment and physical demonstrations , X-ray radiation detection, environmental studies.The dosimeter is a miniature device comprising an ionizing radiation detector (scintillation detector: cesium iodide crystal size 5 * 5 * 30 mm with a solid state photomultiplier), electronic circuitry necessary for its operation, accelerometer, air interface standard Bluetooth 4.0 and a lithium battery CR2032 size. For processing, storage and display of incoming sensor data is used built-in microcomputer, and after data transfer over the radio interface for processing, storage and display information using smart phone or tablet computer running iOS or Android operating system running special applications available for free download in AppStore or Google Play. There are several applications for Atom Swift are functional. For Android is an application Atom Swift (written with a space) and AtomNext (write without spaces). "Dosimeter Atom" for iOS is an application. Capability of the dosimeter with a lot of different applications. For information about applications, refer to corresponding descriptions on additional kbradar.org site.The dosimeter contains no  hazardous and radioactive materials, and dispose of the dosimeter are safe for humans, animals and the environment.The connection between the dosimeter and the smartphone or tablet computer is maintained by radio Bluetooth 4.0 standard, with the loss of communication device operates autonomously as an alarm with adjustable alarm limits. The data on accumulated over time due to lack of dose stored in the dosimeter and sent to the smartphone or tablet computer at the resumption of communication. The value accumulated dose counter - the only information that is stored in the internal memory of the dosimeter offline. In communication with one smartphone or tablet computer can hold a lot of dosimeters Atom.The instrument used modern energy saving technology, but it should be noted that the frequent use of the chime and a low ambient air temperature significantly reduce the duration of continuous operation of the battery. By reducing the battery charge level is below 10% dosimeter will signal this one long and three short beeps, repeated once per minute. In this case, it is recommended to replace a new battery.Specifications Atom Swift:Work scintillation detector size 5 * 5 * 30 mm.Energy range of detected photon radiation - at least 40 - 3000 keVThe maximum counting speed of at least 10,000 pulses / sec.Detector sensitivity to gamma radiation background spectrum - 1700 cpm / mR (47 pulses / second at mSv / h), to gamma radiation cesium-137 1200 cpm / mR (33 pulses / second at mSv / h).Anisotropy of the sensitivity of Cs137 - no more than 30%.battery - Lithium, CR2032.Hours from a fresh battery in natural background radiation without using the chime at least 3 months, at the disconnected wireless interface Bluetooth 4.0 - no less than 6 months.Operating temperature range from -40 to +40 degrees C. When the temperature rises above 40 degrees C the device will alert the user about this two-tone sound siren repeated once per minute. With further increase in temperature the correct operation of the device is not guaranteed.Overall dimensions 53 * 50 * 12 mm.Weight of the device is not more than 20 g.WHAT IN THE BOX:Dosimeter Atom Swiftbattery CR2032 Precautions and preparation for workBefore working with a dosimeter, make sure there is no damage of the dosimeter housing. The dosimeter is not sealed device does not use the appliance under rain or sleet, if necessary measurements protect the device from ingress of water. If water is spilled on or inside the dosimeter, remove the battery and allow to dry thoroughly before the next use. If necessary, keep liquids radiation inspection device at a distance of 1-2 cm from the liquid surface, if necessary, use a plastic bag to avoid contamination of the surface of the dosimeter. Do not subject the monitor to strong shocks and squeezing. When moving from cold to warm room to measurements do not proceed until the surface of the device is present condensed moisture.When contamination of the dosimeter wipe the unit with a soft dry cloth.Protect the unit from strong magnetic and electric fields, static electricity discharges.Do not try to disassemble and repair the unit, when a fault is detected, contact our service center. Remember that any attempt at repair could void your warranty for the dosimeter.Operation. Enabling deviceTo turn on the dosimeter insert the supplied battery. A short beep and turn on the dosimeter.Turn on bluetooth settings used for your smartphone or tablet.Install the application using the links:for iOsfor All Android or by entering in a string search for "dosimeter atom" in the AppStore or by entering «AtomNext» or « : Atom Swift " on Google Play, respectively. Appendix AtomNext for experienced users. Run the application. After a few seconds, the application will detect all are confident in the communication area included dosimeters and give the user the ability to choose which device to operate at the moment. During the linking process dosimeter will emit a double beep, when the loss of connection - single long beep. Modes of the dosimeterYour dosimeter with an application on a smartphone / tablet may operate in two basic modes - search and measurement. Operating mode selection is performed from within the application.Consider the operation of the device in each of them. Search modeSearch mode of the dosimeter is characterized by fast response to changes in the radiation situation, the measurement accuracy is reduced. In the natural background radiation 0.1 mSv / h (10 mR / hr) during a complete changing information does not exceed a few seconds. Work in the search mode is recommended when rapid survey areas, buildings, building materials, vehicles for radioactive contamination. Display search mode is implemented in the form of a graph, histogram, or simulate pointer instrument. Data from the search mode can be used by some applications for replenishment of archives and reference to the map of the area. Measuring modeIn the measuring mode the dosimeter continuously refines the dose rate by displaying information on the statistical error in the measurement of the current session. A new session can be started at any time by pressing the reset button on the screen, all the information about the previous session will be deleted. The measurement mode suited to the detection of inactive objects by comparing the dose rate in the vicinity of the inspected object with the natural background radiation away from it, as well as the need to obtain high accuracy result. To obtain the correct result will not change the position of the instrument during the measurement session.The margin of error decreases with time square, keep in mind that to achieve twice the precision you ..

£285.00 Ex Tax: £237.50

Atom Tag Bluetooth Dosimeter for smartphone

DOSIMETER / RADIATION DETECTOR  ATOM TAG for smartphones and tablets, Bluetooth-dosimeter. Atom Tag radiation dosimeter for the smartphone and the tablet is a Bluetooth-dosimeter,the complex interaction of the radiation detector (dosimeter directly Atom Tag radiation) and an application to be installed on the smartphone / tablet.Radiation sensor comprises a Geiger counter GMS-20 (Geiger-Muller tube). The main advantage of this dosimetric complex - it is a dynamic infographics on the smartphone / tablet screen and several options to control the accuracy of the measurement:In the "locator" (search mode), this allows time for about two seconds to see a dangerous rise in the background radiation of a tenfold excess of natural background levels and above. Or in a time of about five seconds to evaluate the degree of danger of the environment or object within a ten-fold excess of the level of natural background.In the measuring monitor mode allows to independently assess the accuracy of the measurement accuracy by several additional parameters.At the same time, Atom Tag can be used separately: As a stand-alone alarm levels of background radiation.As a "locator" with tactile feedback vibration signals to search for the source of radiation.Or, as tracker: believes and writes the accumulated radiation dose. You can download the App without purchasing the device & test it in Demo-mode.Download Android Atom Swift app or Atom Tag app (depending on your Atom model).In iOS download Atom Radiometer app.Overall dimensions 110 * 25 * 14 mm. Weight of the device is not more than 26 g.The duration of continuous operation from a single charge at a dose rate of 0.1 mSv / h, normal climatic conditions and off the chime: Not less than 30 days.Term of built-in battery life: Not less than 300 cycles. This means that the dosimeter can operate more than 20 years before it will require to change battery! VAT, UK STOCK, 1 YEAR MANUFACTURER WARRANTY, INTERNATIONAL DELIVERY, ENGLISH & RUSSIAN LANGUAGE APP. Box contents: Dosimeter Atom TagThe USB cable chargerCarrying caseSpecification:Atom Tag dosimeter-top box (hereinafter - the dosimeter) is designed for the rapid assessment of the radiation situation on the ground, radiation safety control of buildings, premises, vehicles, various objects and materials, detection and localization of sources of ionizing radiation in the home and at work, use in a physical experiment and physical demonstrations, the X-ray radiation, environmental studies.The dosimeter is a miniature device comprising an ionizing radiation detector (Geiger-Muller), the electronic circuitry necessary for its operation, the air interface standard Bluetooth 4.0 and a lithium-ion battery. For the processing, storage and display of information coming from the sensor uses a built-in microcomputer, and after the transfer of data over the radio interface - a smartphone or tablet running iOS or Android operating system running a special application, available for free download in the AppStore or Google Play.The dosimeter contains no toxic, hazardous and radioactive materials, and dispose of the dosimeter are safe for humans, animals and the environment.Communication between the dosimeter and the smart phone or tablet PC is supported via radio Bluetooth 4.0 standard, with the loss of communication device operates autonomously in a customizable thresholds with alarm warning sound and vibration alarm. The data on accumulated over time due to lack of dose stored in the dosimeter and sent to the smartphone or tablet computer at the resumption of communication. In connection with a smart phone or tablet computer, only one dosimeter Atom Tag can be simultaneously connected to a specific application. On smarfone / tablet running android you can set a number of different applications and are respectively connected to each application one by one dosimeter.To recharge the built-in battery monitor using the USB port of any computer or any device with a USB charger connector and the supplied cable. The instrument used modern energy saving technology, but it should be noted that the frequent use of sound, especially a vibration alarm, and low ambient temperatures significantly reduce the duration of continuous operation of the built-in lithium-ion battery. reducing the built lithium ion battery is below 10% dosimeter will signal this one long and three short beeps, repeated once per minute. In this case, it is recommended built-in lithium-ion battery to fully charge the device for 1 hour using the USB-cable supplied. Before working with a dosimeter, make sure there is no damage of the dosimeter housing. The dosimeter is not sealed device does not use the appliance under rain or sleet, if necessary measurements protect the device from ingress of water. If water is spilled on or inside the dosimeter switch off the appliance, allow to dry thoroughly and fully recharge before next use. If necessary, keep liquids radiation inspection device at a distance of 1-2 cm from the liquid surface, if necessary, use a plastic bag to avoid contamination of the surface of the dosimeter, but no more than one layer. Do not subject the monitor to strong shocks and squeezing. When moving from cold to warm room to measurements do not proceed until the surface of the device is present condensed moisture. When contamination of the dosimeter wipe the unit with a soft dry cloth. Do not use organic solvents to clean the dosimeter: they may damage the housing. Do not try to disassemble and repair the unit, when a fault is detected, contact our service center. Remember that any attempt at repair could void your warranty for the dosimeter.Operation. Enabling deviceTo turn on the dosimeter briefly connect it to the charger or USB-port of a PC using the supplied charging cable. A short beep and dosimeter momentarily vibrates. Turn on bluetooth settings used for your smartphone or tablet.Install the application using the links:for iOs: Atom a Radiometer application:   https://goo.gl/SYzAFjfor All Android: - basic intuitive application for android - Atom Swift app:    https://goo.gl/YF3MZ2- add-on application for android to specialists and to change vibration dosimeter settings inside - AtomNext application:    https://goo.gl/yzP7xL (note: only Atom Swift app for android has ability to record and archive the card )or by entering in the search bar «Atom Radiometer» in the AppStore, and in Google Play - «Atom Swift» or «AtomNext», respectively. Run the application. After a few seconds, the application will detect all are confident in the communication area included dosimeters and give the user the ability to choose which device to operate at the moment. During the linking process dosimeter will emit a double beep, when the loss of connection - single long beep.Modes of the dosimeterYour monitor can operate in two basic modes - the search and measurement. Operating mode selection is performed from within the application. Consider the operation of the device in each of them.Search modeSearch mode of the dosimeter is characterised by fast response to changes in the radiation situation, the measurement accuracy is reduced. In the natural background radiation 0.1 mSv / h (10 mR / hr) during a complete changing information exceeds forty seconds. Work in the search mode is recommended when examining the terrain, buildings, building materials, vehicles for radioactive contamination.Measuring modeIn the measuring mode the dosimeter continuously refines the dose rate by displaying information on the statistical error in the measurement of the current session. A new session can be started at any time by pressing the reset button on the screen, all the information about the previous session will be deleted. The measurement mode suited to the detection of inactive objects by comparing the dose rate in the vicinity of the inspected object with the natural background radiation away from it, as well as the need to obtain high accuracy result. To obtain the correct result will not change the position of the instrument during the measurement session. The margin of error decreases with time square, keep in mind that to achieve twice the precision you need four times more time.SettingsThe application allows the user to select it convenient for the units, the type and properties of the scale, the threshold is over-power warning dose and the accumulated dose and other parameters. We are constantly working to improve the application and we reserve the right to add features that improve its performance.Closing of the applicationThe application after the transfer phone or tablet PC in the standby mode continues to run in the background, supporting communication with the dosimeter and sound and vibration signalling in case of exceeding a predetermined level or dose rate cumulative dose.After finishing the work, close the application. Before long periods of time the device is recommended to turn off its supply of commands from the application. Keep the monitor in a dry place away from strong heat sources, do not let water get into the unit. Transportation dosimeter in the manufacturer's packaging is possible in any mode of transport without distance limitations.Responding to the need to turn on and off the device when there is no connection with your smartphone or tabletIf there is no connection with a smartphone or tablet dosimeter operates in the programmed alarm. Thresholds and alarm types are set when there is a link with a smartphone or tablet.If necessary, turn on or off the device in the absence of a smartphone or tablet, you will need any rod with a diameter of 1.5 to 3 mm, for example a toot..

£145.00 Ex Tax: £120.83

Biolarvicid-100

i4Technology Biological mosquito larvae killer Biolarvicid-100Package contents: Biological mosquito larvae killer Biolarvicid-100 ; English manual; warranty card; package...

£40.00 Ex Tax: £33.33

Biolarvicid-30

i4Technology Biological mosquito larvae killer Biolarvicid-30Package contents: Biological mosquito larvae killer Biolarvicid-30 ; English manual; warranty card; package...

£35.00 Ex Tax: £29.17

BugHunter BDA-2

i4Technology Microphone suppressor BugHunter BDA-2Microphone supressorBugHunter BDA-2  I4TechnologyExposure+voice imitation 100% jamming.5 ultrasonic transducers and powerful speaker.Absolutely soundless operation possible.Jamming range up to max — 7 m, super effective — 2 m.Very powerful emission — up to 120 dB.Able to plug external speakers for big rooms.Detailed english manual included.Upgraded dictaphone suppressor BugHunter BDA-2 (2018 model) — new improved ultrasound pattern modulation and a renewed casing body.The device is designed to protect conversations areas from eavesdropping. Device blocks wireless microphones, tape recorders, hard-wired microphones and most of professional digital tape recorders including tape recorders installed in mobile phones (smartphones). Ultrasonic inaudible noise signal as well as acoustic speech-like noise signal are used in jamming the eavesdropping devices.Products detailsBugHunter BDA-2Dimensions, mm150 x 92 x 28Device weight with batteries, kg0.27Internal source of power supply, V12External source of power supply, V15Effective (maximum) range of jamming the eavesdropping devices, mup to 7Effective (optimal) range of jamming the eavesdropping devices, m2Sound pressure level at 1 m distance from the device, dBup to 120Batteries capacity, mAh1200Package contents:Hidden microphone jammer "BugHunter BDA-2"EU Battery chargerEnglish manualOperationThe device should be placed so that the transducers be directed towards possible location of eavesdropping devices (tape recorders, microphone, "bugs" etc.), for example, toward the new visitors or clients. The optimal distance from the transducers to microphone of the eavesdropping device is up to 2 meters. For maximum protection it is recommended to use two or more devices placed at different locations.Then switch ON the device and adjust the volume of the acoustic speech-like signal so that you can still hear the person you are talking to. You should hold conversation in a low voice but so that you hear well each other without repeating every word. Use TURBO mode for more effective jamming of the microphones.Do not switch on the acoustic speech-like signal when you want the device to be hidden. Note that this is somewhat reduces the effectiveness of the device (the manufacturer cannot guarantee that if you use only one ultrasonic signal the device will jam all tape recorders).It is recommended to connect the device to external speakers (e.g. computer) through the special jack in order to more effectively expose the acoustic speech-like signal in a large room. This will protect the large conversation area from eavesdropping as well as to prevent from eavesdropping by external directed microphones (such as laser).Products detailsBugHunter BDA-2Dimensions, mm150 x 92 x 28Device weight with batteries, kg0.27Internal source of power supply, V12External source of power supply, V15Effective (maximum) range of jamming the eavesdropping devices, mup to 7Effective (optimal) range of jamming the eavesdropping devices, m2Sound pressure level at 1 m distance from the device, dBup to 120Batteries capacity, mAh1200Package contents:Hidden microphone jammer "BugHunter BDA-2"EU Battery chargerEnglish manual..

£525.00 Ex Tax: £437.50

BugHunter BDA-2 ULTRASONIC

i4Technology Microphone suppressor BugHunter BDA-2 ULTRASONICNew model! Effective and absolutely silent microphone suppressor!The model is produced on the basis of the microphone suppressor "BugHunter DAudio bda-2 Voices", but has a completely redesigned system of suppression (specifically for concealed operation). It suppresses ANY devices with microphones: professional voice recorders, radio microphones, mobile phones, wired, wireless and directional microphones. The device turns on quickly by pressing one button and no adjustment is required. Supplied with the clutch bag made of genuine leather.The differences between "BugHunter DAudio bda-2 Ultrasonic" and its prototype "BugHunter DAudio bda-2 Voices":1) Absolutely silent operation. The new model is equipped with ultrasound transducers only and doesn't have built-in audio speaker for speech-like interference. Operating device does not reveal its work that allows you to use it unnoticed by others.2) There is no Turbo mode. "BugHunter DAudio bda-2 Ultrasonic" operates on a different frequency than "BDA-2 Voices" does, therefore, it does not require "Turbo" mode — it always suppresses eavesdropping devices with maximum effectiveness.3) Completely updated suppression system. The device generates completely different ultrasonic interference which is designed to suppress even the newest smartphones with moisture protection and noise cancellation. The interference signal is spread not only in front of the transducers, but also sidewise, that allows you to suppress dictaphones and smartphones located on the side of the device. Such system has no equivalents!Principle of operationThe device generates ultrasonic signal with a help of 5 built-in transducers. The frequency of ultrasound is set by the microcontroller and it changes in accordance with a specially developed algorithm for maximum suppression. Ultrasonic signal generated by the device affects the recording paths of eavesdropping devices (dictaphones, microphones of cell phones, etc.), so that they record only indistinct noise, making it impossible to distinguish any details of the conversation.The device has a jack for connecting external acoustic speakers. Speech-like interference is transmitted through the speakers thus defacing the meaning of the conversation. Therefore, eavesdropping devices record only unintelligible mumbling and it is physically impossible to restore the conversation. Speech-like interference is generated randomly, so you can not filter it even with a help of a special equipment.This complex protection ensures the highest possible reliability and confidentiality. Any spy devices with microphones (even the most expensive) turn into completely useless "toys", because they simply can not record necessary information. At the same time interference does not militate negotiations as ultrasonic signals are not perceived by the human ear and the volume of the speech-like signal is easily adjusted. You and your interlocutor will hear each other perfectly, but nobody will be able to overhear your conversation!Competitive advantages of microphone and dictaphone suppressor "BugHunter DAudio bda-2 Ultrasonic":1) Guaranteed protection. It suppresses most of the spy devices with microphones.The device is designed for mobile and inconspicuous use when only ultrasonic interference is used. It is able to suppress all types of microphones (smartphones, professional recorders like Soroka, Gnom, Edic, etc.) located in the action range of its transducers.2) High suppression power and action rangeThe device emits very powerful ultrasonic signal (not less than 120 dB). There are no equivalents that can compete in power and range with this device in the Russian market. It suppresses microphones at a distance of up to 7 m (23 ft). Most counterparts, especially Chinese ones, perform at least 2-3 times worse. In reality, this figure is even greater, though.The emission power of the device is so high that our experts do not recommend bringing its transducers close to the hearing organs in order to avoid injury.3) For the first time ever! Capability to suppress microphones located on the side of the suppressorThe suppressor generates not only a directed wave of ultrasound, but also a scattered wave that spreads to the sides of the transducers. It means that the interference signal will affect smartphones or dictaphones in the wider sector, capturing space on the side of the transducers. There is a high probability of suppressing spy devices which the suppressor is not directed to.4) Capability of connecting external acoustic speakers to protect large rooms and / or suppress directional microphonesYou can output speech-like interference to external speakers (such as computer speaker system) via the jack located on the front end of the device. This will help you to protect very large room from eavesdropping. In addition, external acoustics will make useless even directional microphones (for example, laser ones). This will save you money on the installation of special vibration window blinds.This video demonstrates the device's operation with external acoustic speakers6) Mobile and stationary useMicrophone, dictaphone suppressor "BugHunter DAudio bda-2 Ultrasonic" operates equally well from two power sources: 220 V power network (connection via the charger supplied) and built-in battery, with capacity of 2500 mAh. Its charge is enough for a few hours, what is very good for such a powerful device.Wherever you go, the suppressor will always be with you and will be able to protect you from the spies. When you have access to 220 V network, you may simply connect the device to it. Thus, the device can be portable and stationary depending on the circumstances.Bundled with handy leather clutch bagThis custom-made leather clutch bag is designed specifically to carry and operate our ultrasonic microphone suppressor BugHunter BDA-2 Ultrasonic. It provides secure protection from external impacts and allows to use the device completely invisibly to surrounding people.Locate BugHunter BDA-2 Ultrasonic inside the clutch bag with transducers directed at the edge with the net so that ultrasonic waves could be emitted without any hindrance. If the transducers are positioned correctly, it does not matter if the clutch is zipped or not.How to useAnyone, even a layman, can use the suppressor. It's very simple, no settings are required. You just need to point the suppressor's transducers in the direction of assumed eavesdropping devices, and turn it on by pressing the button located on the lower end of the device's housing. "BugHunter DAudio bda-2 Ultrasonic" starts operating immediately, protecting you from any microphones.Please, note that you can make the protection even more reliable, using several suppressors and directing them to eavesdropping devices from different sides. For instance, ultrasonic interference from a single suppressor "BugHunter DAudio bda-2 Ultrasonic" cannot be enough to suppress recording on smartphones with moisture protection (iPhone 8+, Samsung Galaxy S10, etc.). In this case, using two or more devices at the same time is the best solution.For maximum protection you can use two or more suppressorsBefore using the suppressor we recommend to:1. Check the battery level if the device is operating autonomously.2. Conduct a small test of the device performance. You can use the voice recorder on your cell phone for the test. Turn the suppresor on, point the transducers at the cell phone and start talking. Then listen to what the cell phone recorded. There should only be unintelligible noise on the recording. If so, the device performs properly.Quality assurance!The device is designed and manufactured by our employees. Our products are produced under complex five-stage quality control system, which guarantees full compliance of the products with the declared technical characteristics.Specifications:Dimensions155х95х31 mm (6,10x3,74x1,22 in)Weight300 g (10,58 oz)Powerbuilt-in battery with capacity of 2500 mAh; 3,7...4,2 VExternal chargerAC 220 V DC 5VSound pressure level at 1 m distance from the deviceup to 120 dBSuppression rangeoptimal — up to 2 m (6,56 ft);maximum — up to 7 m (22,97 ft)Suppression methodultrasonic interference + acoustic interference speech-like interference (only via external acoustic speakers)Operating temperature+5 to +55 °C (+41 to +131 °F)Relative humidity at 25 °C (77 °F)up to 98%Package contents:microphone suppressor "BugHunter DAudio bda-2 Ultrasonic";power adaptor;leather clutch bag;individual packaging;English manual...

£499.00 Ex Tax: £415.83

BugHunter BDA-3

i4Technology Microphone suppressor BugHunter BDA-3Microphone jammer "BugHunter DAudio bda-3 Voices" with 7 ultrasonic transducers — new 2018 model with an improved jamming system and an option to connect an additional external ultrasonic speaker. It has 2 additional transducers on the top panel that create a "virtual wall" for maximum protection from sound recording devices. Device blocks any microphones, dictaphones (including professional ones) in the range of 7 meters (23 ft) and at even greater range when using the external ultrasonic speaker. For a maximal efficiency of ultrasonic interference it is advised to engage "TURBO mode". Acoustic interference volume can be adjusted (and even turned off for a completely silent operation), power can be supplied through a 220V power source or built-in battery."BugHunter DAudio bda-3 Voices" is a highly effective microphone jammerDid you hear about the powerful Russian microphone jammer "BugHunter DAudio bda-2 Voices"? There is an improved version available that provides an even more effective defense — "BugHunter DAudio bda-3 Voices"! New model retains all of the advantages of its predecessor, interference system got improved, two additional ultrasonic transducers and a jack for an external ultrasonic speaker were added."BugHunter DAudio bda-3 Voices" blocks any microphones in the range of 7 metersKey differences from the old model:New jamming system. "BugHunter DAudio bda-3 Voices" has a new ultrasonic pattern that guarantees even more reliable jamming of spying equipment in its range.Two vertical ultrasonic transducers create a "virtual wall" In addition to 5 transducers on BDA-2, the new model has two additional transducers located on the top panel of the device. Emitting interference in a vertical direction these two transducers create a "virtual wall" that protects you from any microphones or dictaphones located behind it.Device is equipped with seven ultrasonic transducers. Two are located on the top and five on the sideAbility to connect an additional ultrasonic speaker. In comparison to "BugHunter DAudio bda-2 Voices" that supported only acoustic speakers to amplify the acoustic interference, the new model supports connection of ultrasonic speakers via mini-jack cable. Working with an additional speaker "BugHunter DAudio bda-3 Voices" efficiently suppresses even hidden microphones, which are located outside the range of seven main transducers. For maximum efficiency additional speaker can be placed on the side of the speaking person (so that transducers are pointed at him from different directions) or under the table.Example of combined usage of a jammer with two speakers (one speaker is located on the wall and the other one is under the table)Important: Ultrasonic speaker is not supplied with the jammer and is sold separately. If needed, you can attach two speakers via a regular splitter for a 3,5 mm jack (shown in the photo below).This simple adapter lets you connect two ultrasonic speakers to the jammerOther advantages of "BugHunter DAudio bda-3 Voices":Acoustic speech-like interference guarantees 100% confidentiality. In addition to ultrasound, the new model has a powerful speech-like interference that generates randomly and makes eavesdropping completely impossible. You can't filter out such interference even on the modern equipment, so no matter what adversaries do they will only record meaningless noise instead of your conversation. You can be 100% sure in your safety!Upgraded hardware. Ultramodern elements base gives you the highest possible power of microphone suppression. Besides, high quality hardware increases reliability of device and extends its operating time. We guarantee trouble-free use of the jammer! "BugHunter DAudio bda-3 Voices" will protect you for a long time without breaking which is not the case for many other devices.100% PROTECTION — not a single spyware with a microphone will be able to "eavesdrop" on your conversation. This reliable protection is possible as a result of using two efficient technologies at the same time: ultrasonic signal + speech-like interference. Any equipment becomes equally useless: laser, wired and wireless microphones, professional dictaphones (such as Soroka, Gnom, E-dic etc.), directional microphones, cellular telephones and etc. "BugHunter DAudio bda-3 Voices" will jam any "bug" and won't let anybody learn your secrets.UNIQUE! Incredibly high suppression power and range! "BugHunter DAudio bda-3 Voices" emits a very powerful ultrasonic and acoustic signals (up to 120 dB). It can jam microphones at a distance up to 7 m (23ft). Most analogues, especially of Chinese production, are at least 2-3 times weaker even going by the declared characteristics. Emission power is so high that our specialists recommend to keep transducers away from hearing organs to avoid injury.NEW! TURBO mode for even more effective suppression when you need absolute confidentiality. TURBO mode activates a special generator which emits ultrasound of a slightly different frequency. Interaction of ultrasonic signals of different frequencies creates frequency beats which raise suppression efficiency without raising emission power. It is a unique development of our specialists! You will not find a similar function in other devices. If you need maximum possible protection against spyware, use acoustic interference together with the TURBO mode and do not worry about anything.Note: The only inconvenience in using TURBO mode is that overlapping signals can be heard by a human. That means that when you are not using acoustic interference but TURBO mode is on, you will not be able to use the jammer absolutely secretly. But it will not prevent you from talking, you do not have to strain your voice to speak louder.Ability to connect speakers to cover larger rooms and/or suppress directional microphones. You can output acoustic interference to external speakers via audio jack located on the front side panel of the device. It will let you protect even very large rooms from eavesdropping. Besides, external speaker makes directional microphones useless.Capability to connect one or two additional ultrasonic speakers makes "BugHunter DAudio bda-3 Voices" even more effective in protecting oneself from audio espionage (Attention! Package doesn't include the additional speaker. It is sold separately)Operating principleDevice generates ultrasonic signal through 7 transducers. Frequency is determined by a micro-controller and variates according to a specially developed algorithm. Ultrasonic signal affects recording paths of spyware which results in them fixating only indiscriminate noise in which conversation can't be distinguished.Besides, powerful speaker creates acoustic speech-like interference which destroys the meaning of the conversation: because of it spyware fixates only indiscriminate muttering, restoring the conversation becomes physically impossible. Acoustic interference is generated randomly so it can't be filtered out even on special equipment.Flexible volume adjustmentAcoustic speech-like interference guarantees the confidentiality of the conversation but has one flaw — unlike ultrasound it can be heard and my be a nuisance in a conversation. Our developers took this into account and developed "BugHunter DAudio bda-3 Voices" with an ability to adjust the volume of the acoustic interference. You can always adjust the volume so that device won't muffle your speech and you could speak comfortably. If suppressor is a nuisance, just turn the volume down. Turning the knob to a minimum you will turn the acoustic interference off.If acoustic interference is turned off, suppressor will be working completely silently (except TURBO mode). One will not pay attention to the working device. If you hide it under the table, for example, there will be no clear evidence that jammer is working.But without the acoustic interference reliability of protection becomes lower. If you want to be 100% certain that ALL devices with microphones are suppressed, you will have to tolerate small inconvenience.Using the jammerAnybody, even a non-professional can use the jammer. All you need to do is point the transducers in a direction of an expected location of recording devices and turn it on. You can adjust the volume level of the acoustic signal if needed. Notice that you can make your protection more reliable by using an additional ultrasonic speakers.Setting up the ultrasound speaker under the table you will make the jammer even more effectiveUse the jammer stationarily or portably"BugHunter DAudio bda-3 Voices" can be powered by power supply or by a built-in battery. Its charge will last for a few hours which is a good number for a device of this power. Wherever you go, jammer will always be with you ready to protect you from spying. And you can charge it and use stationarily when you get access to a power supply.Four-level battery charge indication systemTo avoid missing the moment when the battery loses charge device has a charge indication system. It is a green light on a front panel that has 4 modes:constantly lit — charge is normal;flashes once per second — device works but battery needs charging;flashes 2 time per second — strong battery discharge, device doesn't work;not lit — battery is completely discharged.Specifications:Overall dimensions170х95х31 mm (6,7x3,7x1,2 in)Weight (without adapter)0,3 kg (10,6 lb)Batteries capacityBuilt-in battery 1200 mAhExternal source of power supply12 V, 110/220V networkSound pressure level at 1 m distance from the device, dBUp to 120Rangeoptimal — up to 2 m (7 ft);maximal — up to 7 m (23 ft)Jamming methodUltrasonic interference + acoustic speech-like interferenceCharge indication stages4 (green light: lit, flashes once per second, flashes 2 times per second, not lit)Ultrasonic speaker specifications (Not in..

£585.00 Ex Tax: £487.50

BugHunter BH-03 Expert

i4Technology Signal detector BugHunter BH-03 ExpertPackage contents: Signal detector BugHunter BH-03 Expert; English manual; warranty card; package.Signal detector BugHunter BH-03 Expert is packed with EU plug. English Manual (hardcopy & pdf). VAT, UK stock, Official Distributor, International Delivery.PRODUCT DESCRIPTIONNew "expert" modification of professional bug detector "BugHunter Professional BH-03" received built-in frequency meter, that allows to determine frequency of found "bugs" and an updated filtering system. Device still operates in a wide range of 10-3500 MHz and makes a fast SIMULTANEOUS search of digital and analog bugs. Supports 5 modes of operation.Professional RF detector "BugHunter Professional BH-03" is now even better!We present to you new modification of our best bug detector "BugHunter Professional BH-03 Expert". New device not only detects all known spyware but also provides user with detailed information about found signals and allows to adjust the search parameters to a specific situation.The device is designed for experts in the field of industrial, political and business counter-intelligence activities, it makes their job quicker and more efficient. Besides, it suits those who are not tech-savvy because its operation is very comprehensive, one can search "bugs" with one touch! It is very handy and convenient with a weight of only 110 grams (3.9 oz).Key specifications:Built-in frequency meter automatically detects and displays an operating frequency of the detected bug. It allows BugHunter Professional BH-03 Expert to quickly identify the type of the bug and its location in the room. The system recognises all the most common frequencies:GPRS, EDGE, 3G\4G (cellular communication and data transmitting);DECT (cell phones and radio modules of DECT standard);DECT BASE (base stations of DECT standard);BLUETOOTH (radio modules of BLUETOOTH standard);WLAN (wireless network such as Wi-Fi, Zigbee, LoRA etc.).Updated system of noise filtering. Due to built-in frequency meter the device automatically determines which filters should be enabled for more effective "bug" detecting in a certain location, and display the corresponding information on the screen.BugHunter Professional BH-03 Expert finds all spyware that works In a 10-3500 MHz rangeMain advantages:1. Fast search bugs at a touch.  Thanks to improved ergonomics and modernised construction "BugHunter Professional BH-03 Expert" is one of the most technological and fast bug detectors on the market. It can find the "bug" in just a few seconds!2. Detection of digital and analog bugs simultaneously without settings and switching to different operating modes. "BH-03" model was built around a fast microprocessor, that allows it to find even the most modern digital and analog spyware (for example ones that transmit information via short impulses and remain "invisible" to most bug detectors). What is especially important is that search of both kinds of bugs is made  SIMULTANEOUSLY – it makes the search even faster, makes it easier to use the device and increases it effectiveness.3. Filters out interference, device has built-in GSM, 3G, 4G, CDMA and Wi-Fi filter. If the environment has some sort of extraneous background frequencies that interfere to search – just filter them out. Unique!4. Visual multi-colour OLED display which shows all the necessary information: type or frequency of the received signal (analog and digital at the same time). It allows being in complete control of the situation at any time. Unique!5. Coverage of the ENTIRE frequency range that most of the wireless bugs use (10-3500 MHz). Even further expansion of range would increase the chance of lowering the sensitivity on some of the frequency. Some devices claim to have a frequency range of 5000 MHz or even 7000 MHz but in reality these giant values exist only for marketing purposes, in practice these devices have uneven sensitivity and can’t be relied on. We made sure during the development of "BugHunter Professional BH-03" that it would work with 100% efficiency on all of the frequency range.6. Registration of high dynamic range (70 dB). For example BugHunter BH-02 which holds a leading position among similar devices for wide dynamic range and is considered one of the most efficient and sensitive has only 48 dB. The higher the dynamic range is, the better is the detection of devices with very high and very low power radio transmissions. This is very important in difficult conditions when there are both powerful signal sources (cellular phones) and weak signal sources (almost all types of bugs). Detector with high dynamic range will not read off scale and will find hidden bugs against a backdrop of cellular signal."BugHunter Professional BH-03 Expert" has all of the advantages of its predecessors- Exact match of stated parameters. We guarantee that our device is a 100% match to a stated parameters- High quality components. Device was built from high quality components from a European manufacturers.- Stable detection on all frequencies. Thanks to innovative technologies our bug detector has equally high sensitivity throughout claimed frequency range.- High sensitivity – 50 mV/m. It is very high because only professional detectors, like "BugHunter Professional BH-02" have this level of sensitivity. Standard radio bug with 5 mVt power can be detected from 5 meters and a powerful cellphone signal from 50 meters.- Automatic adjustment to a background level of interference allows device to ignore the signals from a regular electronics and detect only signals that belong to spyware.- Vibration signal (can be disabled) and an option to connect headphones for a discreet notification allows you to be aware of your situations without alerting the people around you.- Universal power circuit. Device can operate on a regular as well as on a rechargeable batteries. Special indicator informs you about charge level and automatic cutoff feature for saving energy.Detects almost any spyware:wireless bugs;cellphones and radios in operation;wireless microphones;wireless videocameras;cellphone jammers;Too much interference? For fast search enable filtersModern city has a lot of different signals: cell towers, radio stations, wireless internet. Most detectors cant work in this environment. To solve this issue "BugHunter Professional BH-03 Expert" has a filter system of most popular types of signals: GSM, 3G, 4G, CDMA and Wi-Fi. You can select one or multiple frequencies that would be filtered and make finding spyware considerably easier.2 main modes and 3 sound modes: fine tuning for a reliable protectionIn comparison to its analogs "BugHunter Professional BH-03 Expert" has a wide choice of modes of operation. Main modes allow to search for analog and digital bugs and to guard the room, while sound modes help finding spyware through audio signals.Main modes of operationSearch. It is enabled by default. OLED display shows graphics of signal levels: maximum values and averaged values for 3 seconds and 45 seconds (in the form of three separate blocks of 15 seconds). Digital "bugs" can be found in the chart of maximum values, and analog "bugs" appear in the chart of averaged values.Security. Turn on "Security" mode if you need to have constant control of the situation, during negotiations for example. The device keeps scanning the space in this mode. It will alarm you if any wireless "bug" or hidden transmitting cell phone appears.Sound modesFeedback. "Feedback" mode is used for searching hidden microphones (wireless "bugs") operating in analog mode. This allows the wireless "bug" to capture the sound emitted by the device, and broadcast it. The radio signal is detected and increased by the device, so the circle closes up – and the device produces a characteristic "whistle." "Feedback" mode is the most accurate method of "bug" detection, it reduces search time.Acoustic indication. In this mode graphic indication is complemented by acoustic indication. A speaker emits sound signals and their frequency inform about power of detected devices (more often the sound, the higher power).Mute. This is excellent operating mode for those who do not want to draw attention. All sound signals are turned off, including the sound of setting up and pressing the keys. However, in this mode you can also conduct a search, without looking at the screen by setting on vibration signal.During the search display shows averaged (pos. 1) and maximum (pos. 2) values of received signals. Display also shows the frequency (pos. 3), chosen sensitivity level (pos. 4), power of currently received signal (pos. 5) and a threshold for activation of vibration signal (pos. 6)Device additionally displays filter status (on or off, pos. 7), vibration signal status (on or off, pos. 8), current sound mode (pos. 9), current mode of operation (pos. 10) and a power indicator (pos. 11).To start the search just turn on the device!No need for adjusting settings — search mode is enabled by default and is searching for digital and analog bugs at the same time. During the search our specialists recommend to priorities furniture, suspended ceiling, cracks in walls, decorative items, radiators etc. Keep the device 50 cm from the investigated area. When detecting increased level of signal you should check the area more attentively. By adjusting sensitivity you can determine the location of found signal. If found bug is analog you can set device to acoustic indication mode to make the search easier.Important! Do not stop the search if you found a bug. Check the premises, it can have a lot more spyware of different kinds (microphones, cameras). Only after complete check you can put the device in "guard" mode. Device will continue scanning the area and will notify you if a bug was not active during the search and was activated later.Important! If the room has too much interference, disable the sources and/or enable filters. This way you will be ab..

£395.00 Ex Tax: £329.17

BugHunter Dvideo Lite BDV-01

Anti Spy Camera Detector BugHunter Dvideo Lite BDV-01Description:Detects spy cameras regardless of whether they are ON or OFF.Detecting distance — up to 18 m.Operation time — up to 10 hours.Detects cameras at any illumination.Detailed english manual included.Bughunter Dvideo Lite successfully finds any spy cameras"Bughunter Dvideo Lite" helps to make yourself safe from unrighteous interference in your private lifeOperating principle is based on the effect of the reverse flare. Device emits light and receives the reflected emission (including the reflected flares from spy cameras). Since the brightness of the reflected beam from the camera lens is in several times higher than the reflections from other objects, then to determine the location of a camera is quite simple.Latent videorecording equipment can be installed in saunas, hotels, restaurants, locker rooms, and sport clubs, tanning salons, offices, in fitting shops, hostels and rental apartments as well as in many other places.The device runs under command of microcontroller with embedded software.It is a portable device designed to detect spy (veiled as different interior items) cameras regardless of whether they are ON or OFF. The device can detect not only wired cameras, but also wireless which use transmitter capable of sending information at 10 meters or even 100 meters distance.The basic rule to detect spy cameras is that the search should be performed in a place where people could probably place a spy camera. The most likely places for camera installation are those from where the working spaces, resting places (chairs, sofas, etc.) and doorways can be easily observed. The camera can be installed in a hollow space of a suspended ceiling, in premise's corners, ventilation shaft, furniture elements (wardrobe, mezzanine, etc.), comfort items or audio-video equipment, etc.You must consider that there may be several cameras. Detection of one or two video cameras do not allow you to consider that the room is completely cleared. To be completely sure of your safety, it is necessary to check all the places from where a latent recording can be performed.To determine what flare you see — spy camera lens or simply a reflection on a smooth surface (e.g., glass or mirror) – you can move aside slightly and continue to observe the same area with the working device. In this case a simple flare disappears, shifts or significantly changes its intensity. However, the bright point of the camera lens remains in the same place and there is a slight change in flare intensity until you stay in a sweep of a camera.Still you need to remember about the optimal working distance which is not more than 18 meters and that the camera can be detected only being in its sweep. Consequently, for more certainty it is recommended to observe the most suspicious places from different angles.Components assembly:1 — Power switch (On/Off)2 — LEDs3 — Camera lens4 — Power jack for battery charger5 — Red filter6 — Battery charge indicator.Products detailsBughunter TM Dvideo Litedimensions, mm92 x 58 x 24weight, gr90detecting distance, m5-18maximum current consumption by the device, mA350operating time on battery (without charging), h10battery charging time, h3Package contents:Spy cameras detector "Bughunter Dvideo Lite"Battery chargerIndividual packageEnglish manualDownload english manualhttps://www.en.i4technology.ru/camera-detector/camera-detector-bughunter-dvideo-lite.phpWarranty: 12 months..

£64.00 Ex Tax: £53.33

BugHunter Dvideo Nano

 i4Technology Camera detector BugHunter Dvideo NanoDetect spy (veiled as different interior items) cameras regardless of whether they are ON or OFF.The smallest spy camera detector in family, just 70 x 52 x 21 mm.Operating time ΓÇö up to 10 hours.Detecting distance ΓÇö up to 18 m.BugHunter Dvideo Nano is the smallest spy camera detector in familyWorld smallest spy camera detector: tiny, handy, trusty!Dvideo Nano ΓÇö is a portable device designed to detect spy (veiled as different interior items) cameras regardless of whether they are ON or OFF. The device can detect not only wired cameras, but also wireless which use transmitter capable of sending information at 10 meters or even 100 meters distance.Operating principle is based on the effect of the reverse flare. Device emits light and receives the reflected emission (including the reflected flares from spy cameras). Since the brightness of the reflected beam from the camera lens is in several times higher than the reflections from other objects, then to determine the location of a camera is quite simple.The basic rule to detect spy cameras is that the search should be performed in a place where people could probably place a spy camera.This compact device can detect wired and wireless camerasThe most likely places for camera installation are those from where the working spaces, resting places (chairs, sofas, etc.) and doorways can be easily observed. The camera can be installed in a hollow space of a suspended ceiling, in premise's corners, ventilation shaft, furniture elements (wardrobe, mezzanine, etc.), comfort items or audio-video equipment, etc. You must consider that there may be several cameras. Detection of one or two video cameras do not allow you to consider that the room is completely cleared. To be completely sure of your safety, it is necessary to check all the places from where a latent recording can be performed.To determine what flare you see ΓÇö spy camera lens or simply a reflection on a smooth surface (e.g., glass or mirror) ΓÇô you can move aside slightly and continue to observe the same area with the working device. In this case a simple flare disappears, shifts or significantly changes its intensity. However, the bright point of the camera lens remains in the same place and there is a slight change in flare intensity until you stay in a sweep of a camera.Still you need to remember about the optimal working distance which is not more than 18 meters and that the camera can be detected only being in its sweep. Consequently, for more certainty it is recommended to observe the most suspicious places from different angles.Products detailsBughunter Dvideo Nanodimensions, mm70 x 52 x 21weight with batteries, gr50AC supply voltage (Li-Pol battery), V3.7Current consumption, mA250Operatin time, hours10Max range of camera detection, m18Battery charging time, hours3Package contents:Spy cameras detector "Bughunter Dvideo Nano"Battery chargerIndividual packageEnglish manual..

£75.00 Ex Tax: £62.50

BugHunter Micro

i4Technology Microphone suppressor BugHunter BDA-2Package contents: Signal detector BugHunter Micro; English manual; warranty card; package.Signal detector BugHunter Micro is packed with EU plug. English Manual (hardcopy & pdf). VAT, UK stock, Official Distributor, International Delivery...

£90.00 Ex Tax: £75.00

Grad 12V battery claws

i4Technology Power supply for Grad repellers 12V battery clawsPackage contents: Power supply for Grad repellers 12V battery claws...

£12.00 Ex Tax: £10.00

Grad 220V Power Supply

i4Technology Power supply for Grad repellers 220VPackage contents: Power supply for Grad repellers 220V..

£12.00 Ex Tax: £10.00

GRAD 505

i4Technology Ultrasonic Rodent Repeller GRAD 505 - Covers up to 500 sq mUltrasonic Rodent Repeller GRAD 505. It is a new compact model with improved radiator and advanced repelling techniques. It offers not only continuous emission power of high level and a big operation areа, but also ABSOLUTELY NOISELESS operation (it generates only ultrasonic frequencies inaudible to humans). The appliance is designed for operation in any premises with an ordinary wall outlet.Rodent repeller "GRAD 505" affects any rodents (mice, rats, hamsters and others) in effective way with the help of new algorithm of sound emission. It is recommended to install more appliances in big premises to provide maximum results. Unique nonrepetitive ultrasonic emission pattern excludes any rodent tolerance!Main features: the maximum emission area is up to 500 m²; ultrasonic emission pattern is circular; improved ultrasonic emission pattern excludes any rodent tolerance; rodents do not return thanks to continuous operation mode; LED indicator enables to control appliance operation.Package contents: ultrasonic rodent repeller "GRAD 505"; English manual; warranty card; package.The ultrasonic Rodent Repeller comes with EU plug. English Manual (hardcopy & pdf). VAT, UK stock, Official Distributor, International Delivery...

£65.00 Ex Tax: £54.17

Grad A-1000 Pro

i4Technology Ultrasonic pest repeller Grad A-1000 Pro Package contents: Ultrasonic pest repeller Grad A-1000 Pro; English manual; warranty card; package.Ultrasonic pest repeller Grad A-1000 Pro is packed with EU plug. English Manual (hardcopy & pdf). VAT, UK stock, Official Distributor, International Delivery. ..

£70.00 Ex Tax: £58.33

Grad A-550US

i4Technology Ultrasonic pest repeller Grad A-550USPackage contents: Ultrasonic pest repeller Grad A-550US; English manual; warranty card; package.Ultrasonic pest repeller Grad A-550US is packed with EU plug. English Manual (hardcopy & pdf). VAT, UK stock, Official Distributor, International Delivery...

£70.00 Ex Tax: £58.33

Grad Ultra 3D

i4Technology Ultrasonic pest repeller Grad Ultra 3DPackage contents: Ultrasonic pest repeller Grad Ultra 3D; English manual; warranty card; package.Ultrasonic pest repeller Grad Ultra 3D is packed with EU plug. English Manual (hardcopy & pdf). VAT, UK stock, Official Distributor, International Delivery. ..

£135.00 Ex Tax: £112.50

Soeks Quantum Professional

SOEKS QUANTUM PROFESSIONAL DOSIMETER/ GEIGER COUNTER/ RADIATION DETECTORFeatures:* English Manual & Menu, EU Certification, VAT, UK Stock, Support and 2 years warranty.* SOEKS "QUANTUM" dosimeter is meant to detect radioactive objects, air, water, food products etc.* SOEKS "QUANTUM" dosimeter is an easy to use and a user-friendly dosimeter providing rich functionality. This device is equipped with two Geiger counters of SBM-20-1 type which make it twice as sensitive to radiation as the SOEKS 01M dosimeter. The SOEKS "QUANTUM" dosimeter is fitted with the most powerful processor among all the dosimeters available on the market.Advantages:* Easy to use, compact and light device. Thanks to its smart interface, it may be used even by a child. The device will suggest by itself which radiation values are dangerous and which are safe. Fully functional. * The dosimeter allows for the measuring of both cumulative dose and background radiation. It is also provided with the "Search" function and the measurement plot for the last few hours. The device displays the readings from two counters at the same time.* The device is made of Soft-touch high quality plastic. 700 hours of non-stop operation from full charge of the batteries. This dosimeter may be connected to a computer to transfer the measurement data to the "SOEKS Device Manager" software. The measurement results may be downloaded in the Excel-format. The users may up-date the firmware up to later versions over the Internet...

£199.00 Ex Tax: £165.83